CTMA News
- DOD Mx Symposium to Spotlight MIC Awards and Next Generation Materiel Readiness
- Cutting the Fossil Fuel Tether
- Cold Spray Repair Technologies Reduce Navy’s Supply Chain Delays
- Joint Intermittent Testing Working Group Announces Two New Military Performance Specifications (MIL-PRF) for Electronic Test Equipment
- NCMS Hosts Sold-Out Technology Showcase at Corpus Christi Army Depot
- Navy REPTX Event Tested Ship Maintenance Technologies Aboard Decommissioned Destroyer
- NCMS Investigates Best Practices for Technology Transition
- Progress in Ground Vehicle Automation Points to Bright Future for Driverless Transportation
- NCMS Industry Partners Shine in the Spotlight at Recent Events
- NCMS Supports Navy’s First REPTX Demonstration of Ship Maintenance Technologies Aboard Decommissioned Destroyer
- NCMS Investigates Best Practices for Technology Transition
- Joint Intermittent Testing (JIT) Working Group Announces Two New Military Performance Specifications (MIL-PRF) for Electronic Test Equipment
- NCMS Supports Navy’s New REPTX Event to Test Dozens of Ship Maintenance Technologies Aboard Decommissioned Destroyer
- NCMS Opens New Office in Norfolk, Virginia
- Initiative Defines Requirements for Applying Predictive Maintenance Capabilities to Autonomous Vehicles
- Project Improves Sustainment Strategies for Critical but Rarely Used Equipment
- New Member Spotlight: Engineering USA
- Upcoming Tech Showcase to Connect Industry Partners with Navy Base’s Technology Insertion Group
- Deadline Approaches for CTMA Projects To Use FY22 Funds
- Corpus Christi Army Depot Seeks Innovative Solutions for NCMS Technology Showcase
- New Tool Monitors Maintainers’ Health and Safety in Confined Spaces
- CTMA Team Developing and Transitioning Cadmium and Hex Chrome-Free Solutions
- Member Spotlight: Concurrent Technologies Corporation
- NCMS: Fueling Our Nation’s Supply Chain Resiliency
- 2022 CTMA Partners Meeting Gathers Leaders from Government, Industry, and Academia to Advance Maintenance and Sustainment Technologies
- Advancements in Reverse Engineering Capabilities Improve Readiness, Lower Ongoing Maintenance Costs of Mine-Resistant Ambush Protected (MRAP) Vehicles
- Member Spotlight: GVS-RPB
- Advances in Cold Spray and Additive Manufacturing to be Featured at Upcoming Pair of Meetings
- Corpus Christi Army Depot to Hold its First Technology Showcase in July
- 2022 CTMA Partners Meeting Registration Deadline Extended to April 22
- Rapid and Agile 3D Scanner with Micron Accuracy Advances Non-Destructive Inspection
- CTMA Collaboration Integrates Teamcenter at NAVAIR FRCs to Support Aircraft Sustainment
- Member Spotlight: Atmospheric Plasma Solutions
- Keynote Speakers Announced for Upcoming CTMA Partners Meeting
- CTMA Collaboration Helps to Build One of the Largest 3D Metal Printers
- Naval History Group’s Display Aircraft Inspection Initiative Safeguards Valuable Artifacts
- New Member Spotlight: Huntington Ingalls Industries (HII)
- NCMS’s Strategic Partnership Between the National Institute for Aviation Research (NIAR) and the B-1 System Program Office (SPO) at Tinker Air Force Base Awarded 100M Contract
- AMPED Project Advances Additive Manufacturing in Army Aviation
- Registration Opens for 2022 CTMA Partners Meeting
- Air Force to Use Computed Tomography to Ensure Quality Control for Additive Manufacturing Parts
- Simulators to Improve Medical Equipment Maintenance and Sustainment Training
- Developing Better Methods and Tools for Multi-Material Joining
- RADIAC Technology Offers More Realistic Training for Those Who Work with Radiation Hazards
- NCMS Announces Overall and People’s Choice Winners for 2021 CTMA Technology Competition
- Air Force Coatings and Corrosion Topics Highilighted in "The ‘Insidious’ Enemy—Preserving Combat Performance"
- Showcase Booklet for 2021 CTMA Technology Competition Now Available
- Member Spotlight: Ansys
- Mobile Cold Spray Unit to Boost Repair Capabilities at Depots
- Member Spotlight: Snap-On Inc.
- NCMS Technology Showcase featured in September Issue of Salute
- Participating in the CTMA Technology Competition Brings Benefits—Exposure, Program Management, Funding
- Innovative Advanced Braking and Suspension Systems Save Soldier’s Lives
- Puget Sound Event Showcased Cutting-Edge Technologies
- Summer Tauber Interns Receive Hands-On Experience in NCMS’s Digital Ecosystem
- NCMS Sources Sought Program Locates Hard-to-Find Technologies for the DOD
- Enter Your Innovations in the 2021 CTMA Technology Competition
- Monthly JTEG Forums Provide Insight into DOD Maintenance and Sustainment Needs
- Dirty Hardware Abatement | Elimination of Cadmium and Hexavalent Chromium in Ground Vehicle Systems
- DOD Promotes Additive Manufacturing Expansion, Standardization, Training Through New Policies, Collaboration
- New Technology Brief Program Launched
- Airless Tire Technology is a Game Changer for the U.S. Army
- CSAT 2021 Spotlights Point-of-Need Technologies
- NCMS Remembers Longtime Friend and Colleague Gabe Draguicevich
- New Guideline on Intermittent Fault Detection To Appear in DOD Electronic Equipment Guidance
- In-person events are back and better than ever—Six reasons to attend
- 2021 CTMA Magazine: Maintenance and Sustainment Enterprise Transformed by Digital Technologies
- 2021 CTMA Magazine: Cold Spray Advances Vision of the Shipyard of the Future
- Summer Tauber Interns Get Hands-On Experience in NCMS’s Digital Ecosystem
- Innovation Expo Provides Face-To-Face Knowledge Sharing Opportunities
- The 2021 CTMA Magazine is now available!
- 2021 CTMA Magazine: NAVSEA 05T Debuts New Technology To Automate Maintenance on Navy Ships
- Automated Technology Increases Efficiency and Lengthens Life of Composite Rotor Blades
- CTMA Effort Brings Domestic Source of Popular Carbon Fiber to U.S. Army
- CSAT 2021 Virtual Tickets
- Plasma Technology Ignites Ideas for a Myriad of Potential Uses
- Maintenance Collaboration Speeds Ship Availability
- 2021 CTMA Magazine coming in May!
- CTMA Initiative Facilitates a Safety Upgrade
- CTMA Project, the Advanced Mobile Universal Electrical Tool (AMUET) Technology from Solavitek Awarded for Reducing Troubleshooting on Aircraft
- The 412th Maintenance Group (MXG) at Edwards Air Force Base (AFB) California selected the 412th Aircraft Maintenance Squadron’s Advanced Mobile Universal Electrical Tooling (AMUET) Team as the Annual Innovation Team Award Winner for 2020.
- US Army Finds Success Through CTMA: Collaboration cornerstone of antenna mount relocation
- NAVAIR Industrial Optimization Plan Will Address Current Issues and Future Needs
- Data Ontology Changes Maintenance Paradigm on a Global Scale
- 2020 Maintenance Innovation Challenge Winner Uses Augmented Reality to Enhance Aircraft Readiness
- Highlight Your Technology in the 2021 CTMA Magazine
- Universal Synaptics Portable Intermittent Fault Detector™ Achieves F-35 Joint Program Office Authority to Operate
- Digitizing Systems Sustainment for Presidential Helicopter through CTMA
- Save the Date: NCMS Hosts Second Technology Showcase at the U.S. Naval Shipyard, Yokosuka, Japan May 12-13
- Steve McKee wins OSD Award for Excellence
- Join Composite Repair Webinar Hosted by New NCMS Member AGFM and NIAR
- NCMS Member Markforged Distributes its 3D Printers to Project DIAMOnD to Print Emergency PPE
- A Record Year for CTMA
- Naval Air Warfare Center, Lakehurst takes both MIC Overall and People’s Choice Award
- Warner Robins Air Logistics Complex: A Culture of Success
- New Antenna Mount Ensures Soldiers are Battle Ready
- Meet CTMA Project Manager Susan Shaw
- Six Finalists Announced for the 2020 Maintenance Innovation Challenge
- Program Executive Officer Ground Combat System Combat Capabilities Development Command
- 2019 CTMA Technology Competition Winner Impresses Norfolk Naval Shipyard
- Eclypse International Wiring Technology Garners Rave Reviews and $15M Award from Navy
- Temple Allen’s SAM Scaling Tool Gets “Standing” Ovation from Maintainers Working at Navy Shipyard and Liberty Ship Floating Museum
- Team SUB Small Business Sustainment Technology Showcase Offered Companies Rare Insights
- Meet NCMS Project Manager Scott Benton
- Team SUB Small Business Sustainment Technology Showcase Offered Companies Rare Insights
- Marine Corps: CTMA Expeditionary Fluid Analysis Capability Initiative Update
- JROBOT Summit III Engaged Stakeholders in Advancing Robotics within DOD
- NESTT Awards NCMS Member SurClean Inc. SBIR Contract
- Meet Adam Korinek New Senior Director of Business Development
- Reversible Adhesives Assist in Mission-Ready Tactical Vehicles Aircraft
- CTMA Initiative Includes First Ever Digital Twin of an Entire Military Aircraft
- CTMA Pearl Harbor Initiative Leverages Digital Twin for Navy’s Next Steps in 20-year Shipyard Modernization Plan
- Meet Project Manager Josh Chapman
- The Maintenance Innovation Challenge Goes Virtual – Submit Now!
- JROBOT Summit III: Leveraging Robotic Capabilities to Enhance Warfighter Readiness
- DAU: Collaboration With the Commercial Industrial Base
- NEW DATE – Funding Deadline for New CTMA Projects is August 10
- U.S. Army taking readiness to MARRS
- Global Combat Support System Integrates Critical Areas under One System
- RECAP – 2020 AM Workshop
- AM Training in Marine Corps Builds Future Workforce
- Meet Kyle Considine
- 2020 Maintenance Innovation Challenge Accepting Submissions
- The Sarcos Guardian XO Full-Body Powered Exoskeleton Wins 2020 CTMA Technology Competition
- New Synapse Application Introduced at Latest Joint Intermittent Test Working Group Meeting
- Joint Artificial Intelligence Center (JAIC) Gets International Attention
- Meet Dr. Cosima Boswell-Koller
- Funding Deadline for New CTMA Projects is August 14
- 2020 Maintenance Innovation Challenge Accepting Submissions Now
- NCMS congratulates the finalists for the 2020 CTMA Technology Competition
- 2020 CTMA Technology Competition deadline Extended to May 29!
- NCMS and U.S. Manufacturers Respond to DOD’s COVID-19 Efforts
- Meet Kevin Nicolai
- AM Workshop goes Virtual this Year
- Funding Deadline for New CTMA Projects is August 14
- Maintenance Innovation Challenge (MIC) call for Abstracts
- AMUET CTMA Initiative Leads to New Wiring Safety for the Air Force
- Meet Frank Schuster
- NCMS Member – Temple Allen uses Maintenance Technology to Refurbish Floating Museum
- Submit Now to the 2020 CTMA Technology Competition!
- Norfolk Technology Showcase Postponed But Still Vital!
- Second Technology Showcase at Puget Sound Naval Shipyard, August 4-5, 2020
- Be a Presenter at the 2020 JCAMS Annual Meeting
- Resources for Manufacturers in the CARES Act
- Immediate Request for White Paper Proposal for DPA Title III Funding
- Defense Industrial Base Essential Critical Infrastructure Workforce
- Recent CTMA Initiatives Span the Maintenance Focus Areas
- Bob Yurko “In Memoriam”
- Updates – CTMA Partners Meeting and Technology Competition
- Register now for the NCMS Technology Showcase at the Norfolk Naval Shipyard
- Register Now: Additive Manufacturing (AM) Workshop June 23-24, 2020
- NCMS Announces Job Readiness Cell Symposium at Portsmouth Naval Shipyard – October 22-23, 2020
- ARL Requests Support for COVID-19 Response
- NCMS Awarded Fourth Consecutive CTMA Cooperative Agreement Contract
- CTMA Partners Meeting Postponed; Competition On As Scheduled
- Air Force to Transition Munitions System Demonstrated Through a CTMA Initiative
- NCMS introduced innovative technologies at Pearl Harbor Naval Shipyard
- CTMA Technology Competition Showcases Innovative Technology to Key Decision-Makers
- CTMA—DOD’s Sustainment Innovation Accelerator celebrated at Partners Meeting
- Register now for the NCMS Technology Showcase at the Norfolk Naval Shipyard
- Save the Date: Additive Manufacturing Workshop June 23-24, 2020
- NCMS Introduced Innovative Technologies at Pearl Harbor Naval Shipyard
- 2019 CTMA Year in Review
- NCMS Partners with Industry to Enhance Readiness at the Pearl Harbor Naval Shipyard
- Register now for the NCMS Technology Showcase at the Norfolk Naval Shipyard June 9-11, 2020!
- Upcoming Inaugural Technology Showcase at the Navy Yard in Washington, DC
- Big Winners!
- NCMS to host second Technology Showcase at the Pearl Harbor Naval Shipyard
- Meet Senior Project Manager Michael DeHeer
- Maintenance Symposium Identifies the Future of Maintenance and Sustainment
- The Air Force and NCMS Member MELD win big at the Maintenance Innovation Challenge
- Stand-up Abrading Machine gets Rave Reviews at October Shipboard Demo
- PMS 555 Industry Day Launched a Collaboration between Industry and Government
- NCMS highlights Six Critical Technologies at the DoD Maintenance Symposium
- Pearl Harbor Naval Shipyard Technology Showcase: Technologies Needed!
- Six Finalists Chosen to Present at the Maintenance Innovation Challenge
- 2020 CTMA Partners Meeting Set for May 5-7, 2020 at Quantico, VA
- Lithium-Ion Battery project increases productivity at DLA
- Anniston Army Depot (ANAD) to host 2019 Remanufacturing Conference
- Funding Available for Environmental Demonstrations
- NCMS members at the 2019 Maintenance Symposium
- Many Firsts for NCMS at the Technology Showcase at the Aberdeen Proving Ground
- Pearl Harbor Naval Shipyard Technology Showcase: Registration is now open!
- Save the Date: Additive Manufacturing Workshop June 23-24, 2020
- CTMA Assists the U.S. Marine Corps (USMC) Embrace Additive Manufacturing
- NCMS/PMS 555 Industry Day – November 7, 2019
- Additive Manufacturing Workshop—Call for Topics
- Save the Date – NCMS Technology Showcase at Pearl Harbor Naval Shipyard & Intermediate Maintenance Facility!
- Anniston Army Depot (ANAD) to host 2019 Remanufacturing Conference
- NCMS and IMS International to Collaborate at World Manufacturing Forum Technical Day
- MKGCS uses Data to Support Warfighter Readiness
- NCMS Technology Showcase: Puget Sound Naval Shipyard: Innovate to Out Pace
- Maintenance Innovation Challenge Deadline Ahead!
- Six Companies with Innovative Technologies to Join NCMS at the 2019 DoD Maintenance Symposium
- Don’t miss the NCMS Technology Showcase: Aberdeen Proving Ground
- 2019 AMMO Wargames
- Upcoming 2020 NCMS Technology Showcase: Pearl Harbor Naval Shipyard & Intermediate Maintenance Facility!
- Maintenance Innovation Challenge Shapes Future of Maintenance and Sustainment
- Funding Deadline for New CTMA Projects is August 9
- NCMS Technology Showcase: Puget Sound Sold Out!
- Save the Date for the 2019 DoD Maintenance Symposium
- NCMS to Host First Ever Technology Showcase at the Army Research Laboratory
- CTMA Technology Competition Award Winner to Demonstrate at Norfolk
- Funding Deadline for New CTMA Projects is August 9
- NCMS Member Company heads to Portugal to Attend Prestigious Incubator
- AM Workshop ReCap
- Composite experts from all over the world converge at Patuxent River Naval Air Station
- NCMS, DoD Identify Significance of Intermittent Fault Testing
- Keynotes set Stage for 2019 CTMA Partners Meeting
- Atmospheric Plasma Solutions wins 2019 CTMA Technology Competition
- The FRCSW Catapult Competition: Where the Rubber Meets the…Tire
- Shipyard Staff Learn about New Technologies
- Experts Discuss Critical Issues
- Flag Accompanies Warrior all over the World
- 2019 JCAMS Agenda Recap
- Atmospheric Plasma Solutions wins 2019 CTMA Competition
- NCMS Welcomes New Members
- The 2019 CTMA Technology Competition finalists announced!
- NCMS Introduces Innovative Technology at Technology Showcase at Puget Sound Shipyard July 24-26
- Anglicotech Assists the DoD with Technology to Improve Readiness
- NCMS Member MDS Coating Works with NAVAIR to Increase Engine Life and Lower operational costs
- NCMS Q&A: ReverseEngineering.com
- Project Success: Blockchain Huge Success Story with Five Demonstrations
- Attention Industry: Industry Day to Provide an Overview of the Shipyard Infrastructure Optimization
- CTMA Partners Meeting Brings Opportunities to Share Best Practices and Network
- 2019 CTMA Technology Competition Places Technology in Front of DoD Decision Makers
- Latest News on Select CTMA Army Projects
- NCMS to host Technology Showcase at Fleet Readiness Center Southwest
- NCMS Technology Showcase: Pearl Harbor becomes first ever cross-services showcase
- Register Now for the 2019 CTMA Partners Meeting
- Maglogix® magnets recognized by one of the nation’s largest shipyards
- Be a Presenter at the 2019 JCAMS Annual Meeting
- Visit NCMS member Temple Allen at MRO America, Booth #451
- NCMS Member Spotlight: Concurrent Technologies Corporation (CTC)
- CTMA Magazine: Have a Presence in the 2019 Edition of the CTMA Magazine, an industry stand out!
- NCMS Hosting Pearl Harbor Shipyard Technology Showcase
- NCMS Technology Showcase taking place this week at Pearl Harbor Naval Shipyard
- 2018 DoD Maintenance Symposium Confirms Maintenance is Key to Readiness
- NCMS Member Maglogix® Wins 2018 Maintenance Innovation Challenge People’s Choice Award
- NCMS Members Universal Synaptics and Lockheed Martin Sign Agreement to Solve Intermittent Anomalies
- NCMS Wins Best Large Booth at the 2018 DoD Maintenance Symposium
- REACT Lab awarded MIC Overall Winner for their AM Metal Tooling and Testing Equipment
- Wishing our NCMS Members, Partners, and Friends a very Healthy, Happy and Successful New Year!
- CTMA Wraps 2018 with Record Growth
- Next Stop: Hawaii
- NCMS Member Perisense Digs Deeper to Illuminate Maintenance Challenges
- CTMA Program Supports Secretary of Defense Aircraft Maintenance Mandate
- NCMS member United Global Group brings data unity to DoD Maintenance Symposium
- Super magnet company Maglogix garners attention at the 2018 DoD Maintenance Symposium
- New NCMS Member SurClean Sets Sights On Maintenance Innovation Challenge!
- Wet Technologies Has the Opportunity to "Clean Up" in the Maintenance Innovation Challenge
- NCMS Member MELD Named "Market Disruptor" at R&D 100 Awards
- Visit the NCMS Booth at the DoD Maintenance Symposium
- Meet the Staff: Marc Sharp
- Project Announcement: Cybersecurity and Risk Management Framework – Phase III
- Lisa Strama: Protecting Additive Manufacturing Workflow with Blockchain Technology
- NCMS Technology Showcase at Portsmouth is the Beginning of a Long-Term Relationship
- NCMS Technology Showcase at Portsmouth Naval Shipyard Supports Warfighter Readiness
- Maintenance Innovation Challenge Finalists Announced; Three NCMS Members Included
- 19 NCMS Members Exhibiting at the 2018 DoD Maintenance Symposium
- NCMS Appoints Two New Board Members
- Project Announcement: AMC Supply Chain Strategy Phase III
- Project Announcement: Light-Weighting Materials
- Project Announcement: Enterprise Maintenance and Sustainment Strategic Transformation
- Project Announcement: Stricken Aircraft Reclamation and Disposal Program
- Thermal Wave Imaging Technology Successful
- Project Spotlight: Improving the Effectiveness of Combat Wounded Warfighters
- Project Announcement: Multifunctional Surface Coating
- New Marine Corps Just in Time Learning site goes live
- NCMS Appoints Lisa Strama as New President and CEO
- First ever Technology Showcase at U.S. Naval Facility in Japan attended by record crowd
- Funding Deadline for New CTMA Projects August 17
- Project Spotlight: Advanced Mobile Universal Electrical Tooling (AMUET) Brings ATE Avionics Anomaly Detection to the Flight Line
- NCMS Releases "Protecting the Additive Manufacturing Workflow with Blockchain Technology" White Paper
- Improving Speed, Cost-Effectiveness of Vehicle Oil Analysis with Portable Test Devices
- NCMS Welcomes Three New Staff Members
- Using Centralized Fleet Monitoring and Management Systems to Leverage Data, Improve Safety, and Optimize Maintenance
- Reducing Hazardous Waste and Turnaround Time with No-Mask Electroplating Methods
- Follow NCMS Updates by Email and on Social Media
- 2018 Maintenance Innovation Challenge Competition Open
- Project Spotlight: Degradation Prevention for Long-Term Tire Storage Sustainment
- Digitization as Groundwork for Transformative Maintenance Process Improvement
- NCMS This Quarter: Non-Destructive Inspection
- NCMS Welcomes Q2 New Members, Additions to AMMP
- 2018 DoD Advanced Composite Maintainers TIM Recap
- 2018 Advance Composite Maintainers TIM Recap
- Bureau of Labor Statistics: Employment Continues to Grow in Manufacturing, across Economy
- Twenty years in the making, CTMA Partners Meeting celebrates the program's accomplishments
- 2018 CTMA/DLA Partners Meeting Recap
- Project Spotlight: Composite Inspection with a Wide Field of Vision: Thermal Wave Imaging’s LASLAT System
- Meet the Staff: John Keippala
- NCMS Celebrates CTMA’s 20th Anniversary with its First Annual Member Meeting
- Department of Defense recognizes the first CTMA Leadership Award winner
- Maglogix, LLC Wins 2018 CTMA Technology Competition with Multi-Pole Permanent Magnets
- Minnesota Wire: Fast, Flexible, and Adaptable Wiring Assembly Manufacturing
- Adding Blockchain Capabilities for DoD and IC Customers
- Enhancing Volumetric Accuracy of Large Machine Tools
- Universal Synaptics Ken Anderson, Featured NCMS Member Meeting Panelist, Promoted to President & CEO
- PPG Adhesives Help Vehicle Manufacturers Build Lighter, Stronger
- NCMS Attends MRO Americas
- Join NCMS, Universal Synaptics, Automated Precision today at MRO
- Emerging Project Exploration: Aircraft Lightening Strikes
- The National Center for Manufacturing Sciences (NCMS) Signs Agreement with Moog to Perform Co-Funded Work Supporting Adaptation of Blockchain Technology for Additive Manufacturing
- NCMS Welcomes Q1 New Members, Additions to AMMP
- NCMS This Quarter: Focus on Composites and Advanced Materials
- Thermal Wave Imaging, Honeywell, Show Potential of CTMA Technology Competition Wins
- NCMS Members API, MCT Present Automated Measurement and Inspection Technology at FRCE
- SAS Institute, NCMS Bridge NAVAIR Aircraft Maintenance Gap
- NCMS Congratulates Members Navitas and Lockheed Martin on New US Lithium Custom Cell Manufacturing Line
- NCMS' Dana Ellis cited in "Test and Measurement Gear Evolves to Measure AM Parts"
- CTMA Technology Competition Extended to April 20
- NCMS Calls for Presenters to Showcase Technologies at DoD Advanced Composite Maintainers Technical Interchange Meeting
- IFDIS Intermittent Fault Detection Incorporated into F/A-18 Engineering Specifications
- Meet the Staff: Nicholas Brown
- The 2017 DoD Maintenance Symposium was something to Bee-Hold
- NCMS Announces Retirement of Haynes, Chenevert
- Advertise Your Organization in the 2018 CTMA Magazine
- 2017 Maintenance Innovation Challenge Winner Announced
- U.S. Air Force Logistics Honored with Prestigious General Spencer Award for Innovation
- NCMS and the DoD celebrate 20 years of collaboration through CTMA
- NCMS to Livestream Portions of DoD Maintenance Symposium
- Booz Allen Hamilton, NCMS Provide Roadmap to Augment USAF Energy Assurance
- Boosting Aircraft Fleet Maintenance with Big Data
- High Performance Racing Team Offers Lessons in Agile Development to DoD Engineers
- Curbing Aircraft Manufacturing Waste and Error with PLM Software Implementation
- Aerospace Manufacturing and Design Spotlights Siemens, NCMS CNC Project
- Aerospace Maintenance Council Hosts First Ever Defense Maintenance Competition
- Meet NCMS at the 2017 DoD Maintenance Symposium
- Applying Blockchain Digital Asset Technology to Additive Manufacturing
- Join NCMS at the DoD Maintenance Symposium Dec 4 - 6
- 2017 Maintenance Innovation Challenge Finalists Announced
- Save the Date for the 2018 CTMA Annual Partners and Integrated Project Meeting
- NCMS' Marc Sharp Speaks to Benefits of Propane for Fleet Vehicles
- TARDEC Releases 30-Year Strategy Value Stream Analysis
- NCMS welcomes new Q3 members Benchmark Electronics, PTC, PwC, and UBT
- Eclypse Test Equipment Pins Down Elusive Wiring Faults
- Maintenance Innovation Challenge Deadline Extended to 9/28
- CompositesWorld: Highlights from 2017 Dept. of Defense Advanced Composite Maintainers meeting
- 2017 DoD Advanced Composite Maintainers TIM Recap
- MFG Excellence Awards Accepting Nominations Now
- Present at These Coming JTEG Technology Forums
- Reverse Engineering, 3D Scanning, or Prototyping Speaking Opportunity
- Call for Technology: Sustainment and Refurbishment of Demilitarized Warheads
- Call for Technology: Electronics Obsolescence and Requirements Sustainability for the Electronics Sub System
- Navitas Systems Announces First UL Recognized StarlifterTM Lithium Batteries for Both the Heavy Duty Class 1 and 2 Lift Truck Markets
- F/A-18 GCU Fault Detection System Paying Off for FRCSW
- Warner Robins AFB Technology Insertion Manager, Frank Zahiri Receives Prestigious Award
- NCMS Member Anglicotech supports US Marine Corps through CTMA
- NCMS sponsors DoD Workshop Tracks at RAPID + TCT
- Business Model Wargame II Recap
- Project Announcement: Advanced Mobile Universal Electrical Tooling (AMUET) for Maintenance and Sustainment -- Phase III
- Project Announcement: MRAP RESET Cable Reverse Engineering
- Sources Sought: Engine Life Management Assistance
- Strategy and Innovation; Enterprise Innovation Management Phase II
- Call for Technology: Spin Pit Testing of Jet Engine Fan Disk in TF33
- Call for Technology: On-Wing Non-Destructive Inspection (NDI) of Jet Engine Fan Disk
- Sources Sought: Reverse Engineering for Air Force Components
- Project Announcement: Superior Energy Infrastructure Maintenance and Sustainment
- Project Announcement: Process Development for Air Force Energy Infrastructure
- Project Announcement: Technical Studies, Analyses for Intermittent Fault Detection Isolation System (IFDIS) Implementation Across DoD
- Project Announcement: Supply Item Logistics Capability Initiative
- Project Announcement: Item Master Logistic Capability Initiative Phase II
- Project Announcement: Supply Item Logistics Capability Initiative
- Project Announcement: Product Lifecycle Management (PLM) for Integrating Maintenance and Sustainment Program Requirements Through an Asset’s Lifecycle – Phase II
- Congratulations to Thermal Wave Imaging; Winners of the 2017 CTMA Technology Competition
- NCMS Opportunity: Power and Signal Cable Reverse Engineering and Development of Improved Maintenance and Reduce PM MRAP Material Shortages
- Automated Precision Inc. – Pioneering Advanced Dimensional Metrology Solutions
- Funding Available for Environmental Technology Demonstrations
- Sources Sought for Military Grade Cables Directory
- 2017 CTMA Annual Partners and Integrated Project Meeting Features IFDIS™ Tour
- Troika Solutions plans for EFAC program deployment across the Department of Defense
- Wishing our NCMS Members, Partners, and Friends a very Healthy, Happy and Prosperous New Year!
- One Network - Air Force, NCMS and Industry Collaborate on Next Generation Expeditionary Logistics Systems
- J Chadwick Co Optical Micrometer replaces "Fingernail Test" used by Army
- NCMS Member Navitas Systems Announces Award to Deploy StarlifterTM Lithium Forklift Batteries at Major Defense Logistics Agency (DLA) Location
- NCMS Members have strong showing at 2016 DoD Maintenance Symposium
- NAVAIR/Thermal Wave Imaging, Inc. Win 2016 Maintenance Innovation Challenge
- NCMS Technology Showcase Recap
- Prognostics and Health Management (PHM) Society Annual Meeting
- 2016 CTMA Technology Challenge Award Winner Announced
- 2016 CTMA Technology Competition
- Forbes features NCMS' work in Exoskeletons
- 2016 CTMA Annual Partners and Integrated Project Meeting
- CTMA Project Announcement: Rapid Development and Acquisition Initiative
- 2015 DOD Maintenance Symposium
- 2015 NCMS Technology Showcase
- CTMA Project Announcement: Predictive Analytics Health Monitoring for Ship Equipment
- CTMA Project Announcement: Removal of Magnetically Attached Devices (ReMAD) – Phase I
- Reducing No Fault Found and Improving Operational Availability through Intermittent Fault Detection and Isolation
- Maintenance Innovation Challenge Finalists Announced
- Information and Nomination Procedures for the 2015 Industry Defense Manufacturing Excellence Award
- NAVAIR Seeks Pinless Connector Applications: Updated
- Integrated Global Information Successes
- NCMS' RARE Parts Team Delivers!
- AIMS installed by U.S. Marine Corp; Instant Results
- CTMA Recently Completed Projects
- Exoskeleton Technology Comes Down to Earth
- CTMA Team wins 2013 Presidential Green Chemistry Challenge Award
- NCMS Teams Up with Marines to Optimize Warfighter Logistics
- CTMA Project- 2D/3D Data Model Collaboration between FRC Southwest, FRC East, and FRC Southeast
- 2012 CTMA Symposium Photos DOD Maintenance
- NCMS Electroplating Project Wins Great Ideas Competition
- VALMT Project Cited as Example of NCMS Collaboration in Automotive Engineering Online
- Naval Undersea Warfare Center (NUWC) Keyport Honored with Defense Manufacturing Award for DOD Maintenance
- Volumetric Accuracy Project Highlighted in Aerospace Manufacturing Magazine
- Dual Awards for NCMS
- Rock Island Arsenal Sponsors Aspire Solutions, Inc Open House
- NCMS Collaboration Featured at the 2010 Great Lakes Manufacturing Forum
- Automated Intensifier Measurement System (AIMS) Ribbon Cutting Ceremony Photos
- NCMS VALMT Team Wins Innovation “Oscar”
- NCMS Project Uses Laser to Remove Paint From Helicopter Blade
- CTMA Project Approvals
- NCMS Technology Showcase Brings Industry Innovation to FRC East
- VALMT Project in Quality Digest
- NCMS Team Honored With Record Seventh Defense Award
- NCMS-Backed Project Recognized by U.S. Congressman Pete Hoekstra