This opportunity is open to all NCMS member at Community level or higher. If you would like to become an NCMS member, please download the application here.
These showcase events in the past have received high accolades for their ability to target the Government’s technology needs, fill gaps and showcase members’ innovations. It is a perfect opportunity that should not be missed!
Registration and agenda will be available next week.
Anniston Army Depot has identified the following as technologies of particular interest:
- Tracking material handling equipment
- Fastener removal
- Automated Inspection process
- Machine tool monitoring
- Automated painting
- Waterjet paint / coating removal
- Electrostatic paint booth
- Manufacturing execution systems
- Bridge scanning capabilities (combination of optical / laser)
- Plating modernization
- Housekeeping procedures for surface contaminates
- Camouflage projection
- Cold spray
- Friction stir welding
- Cadmium plating fasteners
- Supporting industrial base operations
- Reverse engineering capabilities
- Plating and finishing
- Painting and de-painting
- Robotic-assisted ergonomics
Visitor Access Procedures
For Non-Government or Contractors: This Personal Data Questionnaire (380-2 Form) is required for admittance onto the Depot Base for the Showcase. A form is to be filled out by EACH person coming to the Showcase. The 380-2 Form needs two signatures (attendee and their security/personnel officer) to be accepted by Anniston.
Fax the completed form(s) to Anniston Protocol Office (256) 235-4473 before January 15, 2013.
You will not be allowed entrance to the Base or the Showcase unless you have completed this step by the above date.
For DoD Personnel or Contractors with JPAS access: A visit request through JPAS (Joint Personnel Adjudication System) is required.[EVR_SINGLE event_id=”4″] IMPORTANT! All attendees must follow the steps outlined under the “Important Information” tab otherwise YOU WILL NOT BE ABLE TO ENTER THE DEPOT GROUNDS!
Agenda subject to change. Please check back often to see the most updated version.
Tuesday 29 January
Pick-up their badge at the Visitor Center. Possibility of tabletop set-up
Wednesday, 30 January
|0700 – 0710||Arrive at main gate|
|0710 – 0730||Unloading materials and parking vehicles|
|0730 – 0800||Initial tabletop set-up|
|0800 – 0900||Opening Remarks (Mike Burke, Col. Bolander), Greg, Chuck/Debbie|
|0900 – 0945||Group Photo|
|0945 – 1030||Facility Tour (end tour at Bldg 136)|
|1030 – 1200||Tabletop displays|
|1200||Lunch – boxed lunches set-up in the tabletop area|
|1200 – 1600||Tabletop Displays|
|1600 – 1630||After Action Report (OSD, ANAD, NCMS) – Commanders Conf Room|
|1630 – 1700||Networking Reception – MWR Catering|
Thursday, 31 January
0800 – 1400 – Ad Hoc Industry / Anniston Army Depot Dialogue