Monday, 22 March
Pre-Symposium Networking Activities
9:00 a.m. 2:00 p.m. Golf Scramble, Medal of Honor Golf Course
5:00 p.m. 6:30 p.m. Early Registration The Clubs at Quantico Lobby
6:30 p.m. 8:30 p.m. Opening Evening Reception
Tuesday, 23 March
7:00 a.m. 8:00 a.m. Registration and Continental Breakfast
8:00 a.m. Welcome and Opening Remarks Richard B. Jarman, President & CEO, NCMS
8:10 a.m. Commercial Technologies for Maintenance Activities (CTMA) Overview, Greg Kilchenstein, Office of Assistant Deputy Under Secretary of Defense, (Maintenance Policy & Programs)
8:30 a.m. Major General Nickolas G. Justice, U.S. Army Research and Engineering Command, (RDECOM)
9:15 a.m. BREAK 9:30 a.m. Mr. Gary Motsek, Assistant Deputy Under Secretary of Defense (Maintenance Policy & Programs) Acting
10:00 a.m. Mrs. Debra Tune (SES), Deputy Assistant Secretary of the Air Force for Logistics, Office of the Secretary of the Air Force
10:30 a.m. BREAK
10:45 a.m. Mr. Michael Madden (SES), Executive Deputy, Marine Corps Logistics Command
11:15 a.m. Rear Admiral Thomas Moore, Deputy Director for Fleet Readiness, Chief of Naval Operations
11:45 a.m. LUNCH – Lunch Speaker: Voice from the Field and the Reality of Maintenance in Theater, Todd Eggler, International Man of Maintenance
1:00 p.m. Strategic Perspectives on Depot Maintenance Technology Insertion
Senior DoD logisticians will provide strategic perspectives on depot maintenance technology insertion (TI). Panel members will discuss the recent effort by the Assistant Deputy Under Secretary of Defense (Maintenance) and the Services to embark on a requirements-driven approach for identifying and funding TI solutions to depot maintenance problems. They will provide the view from the top as they answer questions related to the Service-specific impact of a requirements-driven approach to TI while emphasizing the need for joint collaboration through the process. Audience participation is encouraged.
Moderator: RDML (Ret.) Steve Heilman, LMI
RDML Thomas Moore – Deputy Director for Fleet Readiness, Chief of Naval Operations Ms. Sharon Smoot (SES), Acting Executive Director for Logistics, Maintenance and Industrial Operations, Naval Sea Systems Command Mr. Michael Madden (SES), Executive Deputy, Marine Corps Logistics Command
Mrs. Debra Tune (SES) – Deputy Assistant Secretary of the Air Force for Logistics, Office of the Secretary of the Air Force
3:15 p.m. BREAK
3:30 p.m. Fuel Leak Technology, Doug Dynes, Pentagon SAF IEL, Michael Evans, Executive Vice President, Aerowing
4:00 p.m. Laser Stripping Technology, John Incata, System Operator, FRC East; Lee Nathan, Mechanical Engineer, Naval Undersea Warfare Center Keyport
4:30 p.m. Adjourn
5:00 p.m. 7:30 p.m. Evening Tabletop Reception - The Clubs at Quantico
Wednesday, 24 March
7:00 – 8:00 a.m. Registration and Continental Breakfast
8:00 a.m. Requirements and Solution-Based Technology Insertion A Balanced Investment Portfolio Approach, Thomas T. Gorman, JG-DM, Secretariat
8:45 a.m. Insertion Requirements; Moderator RDML (Ret.) Steve Heilman, LMI, What IS and What IS NOT a Requirement? (This workshop will identify what the process is for generating and budgeting for a Requirement.) 10:15 a.m. BREAK
Project Tracks(Track Sessions will be held concurrently)
10:30 a.m. Laser Cleaning & Surface Prep for Sustainment Repairs, Tim Niemeier, Vice President, Adapt Laser Systems
10:50 a.m. Practical Cold Spray, Wally Birtch, Senior Application & Development Engineer, Centerline (Windsor) Ltd; Matt Trexler, Army Research Laboratory
11:10 a.m. Laser Additive Manufacturing as Repair for Titanium Compressor Blades, Dr. Shawn Kelly, Research Associate, iMAST, Applied Research Laboratory, Penn State University
11:30 a.m. Repair of Submarine Shafts Using Laser Cladding, Dr. Todd Palmer, Research Associate, iMAST, Applied Research Laboratory, Penn State University
10:30 a.m. Automated Process & Inspection Guide (AP&IG), Randy Kirk, President & CEO, Aspire Solutions, Inc.
10:50 a.m. CH-53 Readiness & Reliability II, Steve Husak, Business Development, REI Systems Inc.
11:10 a.m. Enhanced Wiring Integrity Systems (EWIS) II, Olga Keegan, FRC Southwest, Commodore Wing (SH-60); Shawn Lamper, Program Manager, Eclypse International
11:30 a.m. Night Vision Devices (AIMS), Rick Foley, Chief, New Technology R&D Division, Tobyhanna Army Depot
10:30 a.m. Erosion/Corrosion Resistance Coatings ESTCP Project, Jon Cheverie, Projects, Business Development, MDS-PRAD Technologies Corporation
10:50 a.m. In-Situ Coating Analysis for Hazardous Metals, Mitchell Vickers, Engineering Technician, Norfolk Naval Shipyard
11:10 a.m. Fast Field Fluid Assessment Support Tools (3 FAST), Mitch Shikowitz, Business Development Manager, QinetiQ-NA, Spectro, Inc; Edgardo Guevara, Lubricant Program Manager, Military Sealift Command
11:30 a.m. Improved Stealth and Lower Cost Operations for U.S. Naval Ships Using High-Performance Cordage Deck Edge Netting, Dr. John Puglia, Director of Human and Systems Technology, QinetiQ North America
10:30 a.m. Legacy Lifecycle Data Management, Nainesh Rathod, President & CEO, Imaginestics
10:50 a.m. Sense & Respond LAV III, John McGinnis, Vice President, Solidica, Inc.; Bill Black, President, Black & Rossi, LLC
11:10 a.m. Centralized Fleet Automated Management System (CFAMS), Peter Fausel, Executive Vice President Sales & Marketing, I.D. Systems, Inc.
11:30 a.m. Item Unique Identifier (IUID) Markings for Legacy Parts, Nainesh Rathod, President & CEO, Imaginestics
1:20 p.m. Trivalent Chrome Plating II, Tim Hall, Principal Scientist, Faraday Technologies; Bruce Griffin, Associate Technical Fellow, Boeing Corporation
1:40 p.m. Advanced Tooling for Nickel Plating, George Cushnie, Vice President, Advanced Tooling Corporation
2:00 p.m. Metal Finishing Development, Lindsay Hampton, Chemist, Corpus Christi Army Depot; George Cushnie, Vice President, Advanced Tooling Corporation
2:20 p.m. Optical Generation of 3D Models for Computer-Aided Manufacturing (OptiCAM) IV, Ali Farsaie, President, Spatial Integrated Systems, Inc.
1:20 p.m. Common Automatic Test Equipment (ATE), Richard Freeman, Business Development, Lockheed Martin Simulation, Training & Support; Hugh Pritchett, President, Analysis, Integration & Design, Inc.Manufacturing
1:40 p.m. Volumetric Accuracy for Large Machine Tools, Ron Hicks, Director, API Technical Services, Automated Precision, Inc.
2:00 p.m. Rapid Access to Readiness Essential (RARE) Parts through Rapid Manufacturing & Repair Technologies, Christopher Robinson, Non-Metallics Manufacturing Lead and Autonomous Vehicles Engineering Lead, Naval Air Warfare Center Weapons Division, China Lake; Rex Brown, LLC Mechanical Principal Engineer, Honeywell FM&T; Greg Morris, CEO/COO, Morris Technologies, Inc.
2:20 p.m. General Emulation of Microcircuits (GEM) Overcoming the Microcircuit Obsolescence Issue, Fred Shope, Research Analyst, DLA DSCC GEM Program Office
1:20 p.m. Heat Transfer Classification for Production Tooling & Composite Repair, Tom Rose, President, AvPro, Inc.
1:40 p.m. Inspection & Repair Preparation Cell (IRPC), Frank Elliott, Advanced Initiatives Coordinator, GFM GmbH
2:00 p.m. Use of Microwires for Internal Bondline or Thick Laminate Temperature Measurements, Tom Rose, President, AvPro, Inc.
2:20 p.m. Introduction to Digitizing and Shearography Technology, K.R. Srinivas, Director of North American Operations, Steinbichler Vision Systems
Workload/Workforce/Material Management (continued)
1:20 p.m. Smart Machines II, P.J. Sturdevant, Freedom Product Manager, MAG Industries
1:40 p.m. Stop Training; Start Learning, Dr. Hossein Nivi, President & CEO, Pendaran, Inc.
2:00 p.m. Making Sense of CBM Data Using Advanced Analytics, Joanne Zuzelski, Director of Partner Relations, Enterprise Computing & Analytics, Altair Engineering
2:20 p.m. Lose the weight! Automated Welding of Tubular Metals Using Deformation Resistance Welding, Jim Richter, Director, Gravikor, Inc.
2:40 p.m. BREAK
3:00 p.m. Requirements-Driven Depot Maintenance Technology Insertion: Practical Perspectives
Members of the JTEG will provide practical perspectives on requirements-based depot maintenance technology insertion (TI). Representing their Services logistics headquarters, this panel of subject matter experts provides the link to the shop floor by continuously working to facilitate the introduction of new and emerging technologies, processes, and equipment into the depot maintenance community. They will answer questions that focus on the benefits of Joint Service collaboration and the importance of moving the maintenance community toward a unified, requirements-driven TI approach. Audience participation is encouraged.
Moderator: Steve Siens, JDMAG/JTEG
Greg Kilchenstein – OADUSD (MP&P)
Tom Spitler – Air Force Materiel Command
Kurt Doehnert – Naval Sea Systems Command
Greg Russell – Marine Corps Logistics Bases
Gerry Bates – Army Materiel Command
4:30 p.m. Adjourn