Click here for Symposium attendee list (.pdf)
Monday, April 04
Pre-Symposium Networking Activities
10:00 a.m. – 2:00 p.m. Golf Scramble, Medal of Honor Golf Course
5:00 p.m. – 6:30 p.m. Early Registration – The Clubs at Quantico Lobby
6:30 p.m. – 8:30 p.m. Opening Evening Reception – The Clubs at Quantico
Tuesday, April 05
7:00 a.m. – 8:00 a.m. Registration and Continental Breakfast – The Clubs at Quantico
8:00 a.m. Welcome and Opening Remarks – Richard B. Jarman, President & CEO, NCMS
8:10 a.m. Commercial Technologies for Maintenance Activities (CTMA) Overview, Greg Kilchenstein, OASD, Maintenance
8:30 a.m. Mr. John Johns, Deputy Assistant Secretary of Defense (Maintenance)
9:15 a.m. BREAK
9:30 a.m. Rear Admiral Timothy S. Matthews, USN Commander Fleet Readiness Centers and NAVAIR Assistant Commander for Logistics & Industrial Operations
10:00 a.m. Mr. Grover Dunn, Director of Transformation, Deputy Chief of Staff for Logistics, Installations, and Mission Support, U.S. Air Force
10:30 a.m. BREAK
10:45 a.m. Major General James A. Kessler, Commanding General, Marine Corps Logistics Command
11:45 a.m. LUNCH – Sit down LtCol Todd Rampey, Aircraft Maintenance Officer, Marine Helicopter Squadron One, U.S. Marine Corps
Project Showcases
1:00 p.m. Fast Field Fluid Assessment Support Tools (3FAST), Edgardo S.C. Guevara, Military Sealift Command HQ & Mitch Shikowitz, Spectro, Inc. & Richard Kelley, SenGenuity
1:30 p.m. LAV Sense and Respond, Dr. Robert Lusardi, USMC PM-LAV
2:00 p.m. BREAK
Overcoming the challenges in an ever changing environment. Technology Insertion is important and key to success
2:15 p.m. The Deputy Commanders Panel
Commanding Officers offer vision and leadership, but the deputies execute the changes and long-term plans for the maintenance and repair facilities. This panel of Deputy Commanders will outline how their depot is providing vital services to the Warfighter, and explain what technologies would be beneficial to further improve their responsiveness. Audience participation is encouraged. Moderator – RDML (Ret.) Steve Heilman, LMI
Panel Members:
Trent P. Blalock, Deputy Commander Maintenance Center Albany
William L. Braddy, Deputy Commander Corpus Christi Army Depot
Col Mitchell A. Bauman, Executive Officer, Fleet Readiness Center East
Captain Mark Bridenstine, Production Resources Officer, Norfolk Naval Shipyard
Vince Howie, SES Vice Commander/Director, 76th Maintenance Wing, Tinker Air Force Base, Oklahoma City Air Logistics Center
Project Showcases
3:45 p.m. Smart Machine, Pete Tecos, MAG
4:15 p.m. Adjourn
5:00 p.m. – 7:30 p.m. Evening Tabletop Reception – The Clubs at Quantico
Wednesday, April 06
7:00 a.m. – 8:00 a.m. Registration and Continental Breakfast: The Clubs at Quantico
Project Showcases
8:00 a.m. IUID Marking for Legacy Parts, Nainesh Rathod, Imaginestics, LLC
8:30 a.m. Compressor Airfoil Protective Coating for Turbine Engine Fuel Efficiency, Marcio Duffles, MDS Coating Technologies, Inc. & Greg Kilchenstein, OADUSD MP&P
9:00 a.m. BREAK
Project Tracks (Track Sessions will be held concurrently)
1# Prognostics Based Maintenance
9:30 a.m. Coalition Logistics Interoperability, Matthew Edwards, TopLine Technology Solutions LLC
10:00 a.m. Master Data Management, Jonathan Miller, One Network Enterprises, Inc. & Tom Russell, The Marlin Group, LLC
10:30 a.m. Prognostics Sensor System for Monitoring Differentials on LAV Platforms, Curtis Reichenfeld, Curtiss-Wright Controls Electronics Systems
11:00 a.m. Predictive Modeling with Total Life Cycle Management Assessment Tool (TLCM-AT), Pat Connally, Clockwork Solutions, Inc.
2# Maintenance Support
9:30 a.m. Visual Work Cards for Jacket File Process, Randy Kirk, Aspire Solutions, Inc. & Mike Oestmann, Red River Army Depot, Invited
10:00 a.m. Rock Island Data Capture, Randy Kirk, Aspire Solutions, Inc.
10:30 a.m. Navy Maintenance & Repair Partnership Program (NMRPP), Tony Haynes, NCMS
3# Depot Operations
9:30 a.m. Centralized Fleet Automated Management System, Red River Assessment, Ken Ehrman, I.D. Systems, Inc.
10:00 a.m. Robotic Automated Coating Removal Process System (RACRS), Dr. Ted Reutzel, Penn State ARL & Ben Thompson, FRC East
10:30 a.m. Inspection and Repair Preparation Cell, Frank Elliott, AGFM/GFM & Jani Le, Warner Robins ALC
11:00 a.m. Metal Finishing Development Program, Jeremy Smith, Corpus Christi Army Depot & Dr. Alan Rose, Elsyca
4# Deployed Technologies
9:30 a.m. Qualification of Powder as Chemical Agent Resistant Coating (CARC), John Escarsega, Army Research Laboratory
10:00 a.m. Business Growth and Training Solutions, Bill Chenevert, NCMS
10:30 a.m. Enhanced Wiring Integrity System (EWIS), Shawn Lamper, Eclypse International Corporation
11:00 a.m. OptiCAM, Ali Farsaie, Spatial Integrated Systems, Inc.
11:30 LUNCH – Buffet
Project Tracks (Track Sessions will be held concurrently)
1# Reliability
1:00 p.m. Intermittent Fault Detection and Isolation System, Ken Anderson, Universal Synaptics Corporation
1:30 p.m. Improved Stealth and Lower Cost Operations for U.S. Naval Shipsusing High-Performance Cordage Deck Edge Netting, Cheryl Gomes, QinetiQ North America
2:00 p.m. Catapult Alignment Position Measurement Automation, Sean Krieger, Penn State ARL
2:30 p.m. Corrosion Resistant Solid State Thin-Walled Component Joining for Maintenance and Repair Applications, Andrew Taylor, GraviKor, Inc.
3:00 p.m. Tactical Troubleshooting System, Steve Spurlin, DIT-MCO International Corporation
2# Maintenance Support
1:00 p.m. Enabling USMC Expeditionary Logistics through Data Exploitation and Knowledge Management, David Cooper, Anglicotech LLC
1:30 p.m. Volumetric Accuracy for Large Machine Tools (VALMT), Kam Lau, Automated Precision, Inc.
2:00 p.m. Automated Form Board Process, Nainesh Rathod, Imaginestics, LLC
2:30 p.m. Automated Intensifier Measurement Systems (AIMS), Brian McIntyre, Penn State Electro-Optics Center
3:00 p.m. Product Data Management/Technical Information Architecture, Robert Missig, Portal Dynamics, Inc.
3# Depot Operations
1:00 p.m. Validation of Functional Trivalent Chrome Plating Process, Dr. Tim Hall, Faraday Technology & Ben Thompson, FRC East
1:30 p.m. Beaker to Bomber, Dr. Alan Rose, Elsyca
2:00 p.m. New Technology Metal Deposition Repair, Todd Palmer, Penn State ARL
2:30 p.m. RARE Parts under Rapid Manufacturing & Repair: Additive Manufacturing Today and the Vision for Additive Manufacturing Tomorrow
The Additive Manufacturing (AM) capabilities existing within the NCMS RARE Parts Team will be featured along with examples of AM applications in their maintenance and production operations today, how AM can be used in near term operations, and what is needed to propel AM into use in future operations. Dr. Frazier will provide an overview of NAVAIR’s DDM (AM) roadmap and vision for AM, and will share with us how AM fits in ONR’s Future Naval Capabilities (FNCs). Audience participation is encouraged.
Moderator – Constance Philips, NCMS
Panel Members:
Stephen P. Rocca, Senior Manager, Mechanical Engineering Laboratories, Lockheed Martin Missiles & Fire Control, Orlando
Robert E. Kestler, Science & Technology Lead, Naval Air Systems Command (NAVAIR), Fleet Readiness Center East
Theodore Anderson, NASA, Marshall Space Flight Center, Rapid Prototyping Lab, (Raytheon/Jacobs ESTS Group), EM42 non-metals, Laboratory Lead, Huntsville
William E. Frazier, Ph.D., Chief Scientist, AIR-4.3, Air Vehicle Engineering Department, Naval Air Systems Command Patuxent River
3:30 p.m. BREAK
3:45 p.m. Wrap-up Discussion
4:00 p.m. Adjourn
4:45 p.m. – The National Museum of the Marine Corps Tour
6:45 p.m.
