CTMA Projects

Voice-Directed Inspection Maintenance System (VIMS) – Phase II

Voice-Directed Inspection Maintenance System (VIMS) – Phase II

Additive Manufacturing for Fleet Casting Sustainment

Strategy and Innovation; Maintenance & Sustainment Knowledge Management System

Information Assurance and Cyber Controls Initiative

Turbine Compressor Blade Evaluation

Telematics Migration to Management Information System

Advanced Lithium Battery Technology Demonstration for Forklift Trucks

Multiple Source Fuel Management; Management Information system

Joint Maintenance Data Enterprise Interoperability – Phase III

Minimizing the Air Force Vulnerability During Smart Grid Upgrades to Ensure Sustainment

Degradation Prevention for Long-Term Tire Storage Sustainment

Reversible Adhesive System to Improve Both Maintenance and Sustainment

Powder Coating and Flame Spraying Technologies for Maintenance and Sustainment

Product Lifecycle Management (PLM) for Aircraft Maintenance & Sustainment Support for FRC Southeast – Phase IV

Product Lifecycle Management (PLM) for Integrating Maintenance and Sustainment Program Requirements through an Asset’s Lifecycle

Modern Information Technology Portfolio Management Improvement Initiative – Phase II

Extending Lead-Acid Battery Life via Desulfating Chemicals

Lightweighting and Joining Adhesives for Maintenance

Autonomous Transport

Advanced Mobile Universal Electrical Tester (AMUET) for Maintenance and Sustainment – Phase II

Advanced CARC Coatings for Cleanability and Condensing for Maintenance and Sustainment

Shareable Operational Resources Tool (SORT) Operational Enhancements and Demonstration – Phase II

Strategy and Innovation; Enterprise Innovation Management

Optimizing the Performance of the H-60 Integrated Mechanical Diagnostic System (IMDS) & T-700 Engine Electrical System – Phase II

Ncompass-Voyager The Duke, IED Countermeasure Device Test Program Set (TPS)

Expeditionary Fluid Analysis Capability Business Case Analysis Development – Phase III

Composite Maintainers – Technical Interchange Meeting Roadmap Development

Enterprise Condition-Based Maintenance Plus (eCBM+) Interoperability – Phase II

Airfoil Protective Coating Transition for Joint Service Aircraft

Air Force Item Master Logistics Capability Initiative

Enhanced Environmental Performance for Safety Glass – Phase II

Multi-Substrate Paint Adhesion Improvement

Integrated Corrosion System

Voice Directed Maintenance & Inspection

Advanced Thermoplastic Membranes for Water Filtration

Consolidation of Adhesives and Sealants

Product Lifecycle Management (PLM) for Aircraft Sustainment and Support for FRC East – Phase IV

Rapid Development and Sustainment

T700 First Stage Turbine Nozzle Sand/Salt Phobic Treatment Concept Demonstration

Product Lifecycle Management (PLM) for Aircraft Sustainment and Support for FRC Southwest – Phase IV

Removal of Magnetically Attached Devices (ReMAD) Effectiveness and Sustainability Assessment

Enterprise Condition-Based Maintenance Plus (eCBM+) Interoperability

USMC Condition-Based Maintenance (CBM+) Enterprise Implementation Initiative – Phase III

USMC Condition-Based Maintenance (CBM+) Enterprise Implementation Initiative – Phase I & II

Test Measurement and Diagnostic Equipment (TMDE) – Phase III

Test Measurement and Diagnostic Evaluation (TMDE) Initiative – Phase II

Test Measurement and Diagnostic Evaluation (TMDE) Initiative – Phase I

T700 Joint Field Service Evaluation Plan and Requirements

T700 Improved Durability Compressor Coating Hardware Processing to Support Qualification/Field Service Evaluation

Shareable Operational Resources Tool (SORT) Operational Enhancement and Demonstration

Retail Supply Chain PAAS Integration Initiative

Resource Synchronization Tool Evaluation

Reducing Maintenance Costs Through Predictive Analysis

Product Lifecycle Management for Aircraft Sustainment and Support – Phase IIIB

Platform as a Service (PaaS) Enterprise Logistics Data Warehouse Review and Evaluation Proof of Concept

Optimizing the Performance of the H-60 Integrated Mechanical Diagnostic System (IMDS) and T-700 Engine Electrical System

Naval History and Heritage Command Display Aircraft Inspection Initiative – Phase II

Joint Maintenance Data Enterprise Interoperability – Phase II

Joint Intermittence Testing (JIT) Capability – Phase II

Joint Field Service Evaluation Plan (Common Vendor)

Integrating 3D Technical Data Packages (TDPs) into a Product Lifecycle Management (PLM) Environment

Industrial Human Augmentation Systems (iHAS) for Improved Shipyard Operations – Phase II

Industrial Human Augmentation System (iHAS) for Improved Shipyard Operations

Increased Reliability of Full Authority Digital Engine Control (FADEC) System – Phase II Test Program Set (TPS) Integration and Training

FORTIS/OLAD – Test and Evaluation of the Industrial Human Augmentation System for Corrosion Control Applications

Expeditionary Fluid Analysis Capability Joint Specification Development and Benefits Analysis

Erosion/Corrosion Resistant Coatings for Gas Turbine Engine Compressor Systems Operating in both Sand and Maritime Environments

Enterprise Condition-Based Maintenance Plan (eCBM+) Interoperability

Enhanced Environmental Performance for Safety Glass

AGT1500 Engines with Coated Compressor Blades Business Case Analysis

Advanced Mobile Universal Electrical Tester (AMUET) for Aircraft Subsystems

CTMA Connector for April 2012 DOD Maintenance Update

The CTMA Connector May 2011

Koops Honored with Defense Manufacturing Award

NCMS at a Glance- April 2011

The CTMA Connector April 2011

2011 CTMA Symposium Photos

NCMS at a Glance- March 2011

The CTMA Connector March 2011

The CTMA Connector February 2011

2011 CTMA Symposium

The CTMA Connector January 2011

Dual Awards for NCMS

The CTMA Connector December 2010

2010 NCAT DME Award Winner

2010 CTMA Symposium

2010 Ribbon Cutting and Demonstration AIMS

VALMT Wins R&D 100 Award

VALMT Wins R&D 100 Award

2010 Department of Defense Maintenance and Symposium Photos

Rock Island Arsenal Sponsors Aspire Solutions, Inc Open House

The CTMA Connector November 2010

The CTMA Connector October 2010

Automated Intensifier Measurement System (AIMS) Ribbon Cutting Ceremony Photos

2010 Modern Day Marine Video

The CTMA Connector September 2010

NCMS VALMT Team Wins Innovation “Oscar”

The CTMA Connector August 2010

Automated Intensifier Measurement System (AIMS) Ribbon Cutting Ceremony

NCMS Project Uses Laser to Remove Paint From Helicopter Blade

CTMA Project Approvals

The CTMA Connector July 2010

Technology Showcase Report- Albany, Georgia

The CTMA Connector June 2010

The CTMA Connector May 2010

NCMS Technology Showcase Brings Industry Innovation to FRC East

SAVE THE DATE- Technology Showcase Albany, Georgia

Aerospace Engineering & Manufacturing- VALMT Project Game Changer in Large-Part Machining Accuracy

Aerospace Engineering & Manufacturing- VALMT Project Game Changer in Large-Part Machining Accuracy

Robotics Technology Consortium Announces Research Projects

Register Now! Technology Showcase Update- FRC East- Cherry Point, NC

The CTMA Connector April 2010

2010 CTMA Working Symposium Photos

Mayor Visits NCMS Bremerton Office

The CTMA Connector March 2010

VALMT Project in Quality Digest

Technology Showcase Update- FRC East- Cherry Point, NC

The CTMA Connector February 2010

2010 CTMA Working Symposium Update

NCMS Radio Podcast: Collaborate, Innovate, Commercialize- Volumetric Accuracy for Large Machine Tools (VALMT) Project Success Story

2010 CTMA Symposium "Sustaining Technology Through the 21st Century...and Beyond," March 22-24, 2010

2010 CTMA Symposium "Sustaining Technology Through the 21st Century...and Beyond," March 22-24, 2010

Technology Showcase- Fleet Readiness Center East- Cherry Point, NC

The CTMA Connector January 2010

Technology Showcase- Fleet Readiness Center East (Cherry Point, NC)

CTMA Project Opportunity- NCMS Lightweight Structure Fabrication Using Deformation Resistance Welding

NCMS Project Team Collects Defense Manufacturing Award

The CTMA Connector December 2009

MFG.COM VALMT Project Q&A with Tony Haynes

MFG.COM VALMT Project Q&A with Tony Haynes

2009 CTMA Symposium

NCMS Team Honored With Record Seventh Defense Award

Ribbon-Cutting Ceremony Invocation from the Fleet Readiness Center East (Cherry Point)

Ribbon-Cutting Ceremony Photos from the Fleet Readiness Center East (Cherry Point)

2009 Department of Defense Maintenance Symposium and Exhibition Report

The CTMA Connector November 2009

SAVE THE DATE- AMT/NCMS Manufacturing Technology Forum March 30-31, 2010.

SAVE THE DATE- CTMA Symposium "Achieve Technology Collaboration" March 22-25, 2010.

SAVE THE DATE- CTMA Symposium "Achieve Technology Collaboration" March 22-25, 2010.

Ribbon-Cutting Ceremony at the Fleet Readiness Center East (Cherry Point), Wednesday, November 18, 2009

Tobyhanna Army Depot Technology Showcase Report

The CTMA Connector October 2009

CTMA Project Opportunity- NCMS Seeks Participants for the Trivalent Chrome Phase II

NCMS Promotes Member Technology at 2009 Department of Defense Maintenance Symposium and Exhibition

The CTMA Connector September 2009

NCMS Seeks Participants for the IUID Marking of Legacy Parts Project

NCMS Member Event- Technology Showcase October 14, 2009

The CTMA Connector August 2009

CTMA Project Opportunity- Chemical Composition Cleaner for Contaminated Components: “C5 Unit”

CTMA Project Opportunity- Green Metal Cutting Solutions

Barstow Technology Showcase Report

The CTMA Connector July 2009

The CTMA Connector June 2009

Project Opportunity Rapid Access to Readiness Essential (RARE) Parts

The CTMA Connector May 2009

Technology Showcase- Barstow Marine Corps Logistics Base- June 24, 2009

CTMA Project Opportunity - Automated Intensifier Measurement System (AIMS)

NCMS-CTMA 2009 Recap- Navy, Capt Tim Matthews, Command Officer, Fleet Readiness Center Southeast (FRCSE)

NCMS-CTMA 2009 Recap- Dr. Katherine Stevens, Director Materials and Manufacturing Directorate, AFRL

NCMS-CTMA 2009 Recap- Col Dale Johnson, Commander, Maintenance Center Barstow

NCMS-CTMA 2009 Recap- Colonel Ron Alberto, Logistics Corps Commander, Tobyhanna Army Depot

NCMS-CTMA 2009 Recap- Dr. Raj Iyer, TACOM LCMC Data Czar Director, Product Data & Data Management, TACOM Lifecycle Management Command

NCMS-CTMA 2009 Recap- Dr. Raj Iyer, TACOM LCMC Data Czar Director, Product Data & Data Management, TACOM Lifecycle Management Command

NCMS-CTMA 2009 Symposium Day 2 Photo Gallery

NCMS-CTMA 2009 Recap- MajGen Scott G. West, Commanding General U.S. Army TACOM Lifecycle Management Command

NCMS-CTMA 2009 Symposium Day 1 Photo Gallery

NCMS-CTMA 2009 Recap- John B. Johns Assistant Deputy Under Secretary of Defense for Maintenance

The CTMA Connector April 2009

NCMS-CTMA 2009 Symposium Photos

NCMS-CTMA 2009 Symposium Final Update

NCMS-CTMA 2009 Symposium Update

The CTMA Connector March 2009

CFAMS Ribbon Cutting Ceremony

The CTMA Connector February 2009

FluidScan Monitor Wins Great Ideas Symposium Award

Invitation to Ribbon Cutting for CTMA project at the Sierra Army Depot

NCMS Seeks Information on Conversion of Legacy Paper Technical Manuals to S1000D Compliant Electronic Form

Common ATE Project Seeks Sources

The CTMA Connector January 2009

2008 CTMA Symposium

2008 Department of Defense Maintenance Symposium and Exhibition